This machine provide perfect
internal cleaning , filling , capping P.c bottles with out any overflows
All the surface which contact with water made off stainless
steel AISI 316 ,with CE certificate
the process & process time controlled by PLC , through the display monitor you can enter the parameter and read error mesages
Washing Group :
Bottles feed is done in horizontal
way, after that go through 16 ,20,30 internal washing stations (according to
the client demmand ) as following : prewashing , wash with warm medicated
water, ozonated water, disinfectant, ozonated water, washing is carried out in
six stages, including the last rinse Filling Water.
+ The discharge washing water of each stage go to
lower tanks and the system prevent the washing water of each stage be mixed
+Due to the structure of the
machine The washing process is done in
closed area with fully sealed Windows
+ Through easy open covers ,
cleaning the tanks will be done easily
+ Using hot water which heated by
resistance or steam are made according to customer demand.
+the motion of the nozzles in the medicated hot water washing stage provide cleaning inside the bottle and reched
to all parts inside the bottles and
cleaned it
+ After washing the inside and
outside of the bottle it return to the
tank through a sieve.
İn the last stage of the internal
washing stations the botlles are rinsed
by pressing the booster pump
and automatically transferred to
the filling unit . Water goes directly into the pre-wash station in the
station. Thus, water savings are done
Filling Unit
+ P.C bottles upload as Horizontal and automatically way to Wash socket and cleaned through 16 stations.
+ The P.C bottles become upright
position at the filling group and centrilized under filling nozzles
+Filling tank have 2 pumps (slow –
fast ) so the filling is done and controlled without overflow
+Each nozlle have 3 actuators
valves controleed by PLC and provide the filling without overflow
(according to client demand it can be made flowcontrol system)
+The filler group has glass covers so monitoring the process is
availabele and this covers opened easily
+ that carry air to enter into the
body to prevent the outside air that HEPA filter system has been positive.
+By applicate positive air through
HEPA filtir system , prevent Dirt and micro-organisms to enter inside the
machine
Rotary and linear type is available
Closing Unit
+ the conveyor which stopped during filling will be move after fillng process is finished and let the bottles pass to the clouser unit
+ the orientor let the capps go
through the rail then it is taken from
the channel by the end of the Bottles
+ caps washed by ozonated water
(O3) during their going to the bottles
+ the process is done in closed ares and untouched . the process & process time controlled by PLC , through the display monitor you can enter the parameter and read error mesages
Model | Capacity |
Rinsing-Filling-Capping CPW-1 | 250 - 230 |
Rinsing-Filling-Capping CPW-2 | 450 - 430 |
Rinsing-Filling-Capping CPW-3 | 720 - 700 |
Rinsing-Filling-Capping CPW-4 | 960 - 900 |
Rinsing-Filling-Capping CPW-5 | 1200 - 1100 |
Rinsing-Filling-Capping CPW-7 | 1600 - 1500 |
Rinsing-Filling-Capping CPW-10 | 2400 - 2150 |
Rinsing-Filling-Capping CPW-10 -26 | 2000 - 2200 |